Brother DCP7055 New Toner not recorgnised
A Brother DCP-7055 had a new toner installed which is failed to recognise.
Resetting the counter resolved the problem:
1. Open the front door to access the toner
2. Press the “Clear” button.
3. Press the “Start” button.
(When you press START the screen should clear.)
4. Press the “↓” or “Down Arrow” button.
5. Press the “↑” or “Up Arrow” button.
(When you press the down arrow an ‘E0′ should appear, which will change to ’00′ when you press the up arrow)
6. Press the “OK” button.
(When it say s ‘ACCEPTED’)
7. Close the front door.